Solar Water Heater Tank Producing Line-Automatic Outer Tank Sewing Machine-Open Type

• After-sales Service: 3years
• Warranty: 3years
• Type: Electrostatic Spraying Equipment
• Application: Hardware Spraying Equipment
• Certification: CE
• Method Type: Automatic
• Model NO.: EN-SWHN
• Condition: New
• Solar Machine Model: En-Swhn
• Material: Stainless Steel ; Gavalized Steel
• Net Weight: 4600kg
• Shear Length Range: Adjustable
• Tank Diameter: 310—600mm
• Tank Length: 1000-3200mm
• Rated Power: 7.5kVA
• Rated Voltage: 380VAC 50Hz
• Compressed Air Pressure: 0.45MPa
• Production Line: Non Pressure Water Tank &Pressure Water Tank
• Barrel Diameter: 310-800mm
• Transport Package: Container
• Trademark: Ensource
• Origin: China, Zhejiang
• HS Code: 84623920
• Production Capacity: 100-1000 Sets/Day

Product Description

       Solar Water Heater Tank Producing Line-Automatic Outer Tank Sewing Machine-Open Type

I. Brief Introduction

The working speed of this machine is 40 times/minute and it needs 4 processes to complete each barrel. People has to Load and unload materials, but its working efficiency is high, outward appearance is attractive and performance is stable. So this machine is an ideal folding and pressing equipment for different kinds of thin barrel--shaped containers.




II. Technical Data
i.working conditions
1.Cylinder diameter : diameter 310-600mm
2.Working piece thickness  :03-0.6mm
3.Maximum tank length :L=3000mm
4.Pressure groove depth ≤     mm
5.Pressure tenon width≤     mm
6.Material :pearl plate, galvanized ,stainless steel, titanium etc….
ii.technical parameter, requirement
1.The rated voltage : 380VAC 50HZ
2.Rated power :0.5KVA
Bending and pressure , the height and width, , According to customer requirements, if  no special requirements, according
iii.conventional production requirements
1.compressed air pressure: 0.25mMpa ~ 0.6mMpa
2. The Pneumatic components :cylinder, solenoid valve ,is from AIRTAC
It is applicable for the tenon-mounted water barrel to be solid-pressed and get a nonrecurring forming,water tanks for solar water heater vacuum tube in two holes fold one side of the ribs, the solar water heater vacuum tube inside the barrel hole placed on a flat surface, so that vacuum holes 2-3 point increase instrength, in the operation does not cause pore deformation, reducing scrap, sheetbend does not produce pressure marks, no special mode With, the use of low-cost, easy installation and operation are with high flatness.

III.FAQ

1)  Q: What is your Delivery Time?
A: LCL order/Sample order:10 days
Full container order:15 days
2)    Q: What is your Warranty Time?
A: 3 years.
3)    Q: Can you accept OEM?
A: Of course!
4)    Q: What is your Payment Term?
A: We accept T/T or L/C at sight,Western Union,MoneyGram,Paypal.
5)    Q: What is your MOQ?
A: 1 sets.
6)    Q: What is your Packing?
A: Carton container.
7)    Q: What is your FOB Port?
A: We accept FOB SHANGHAI etc
8)    Q: What is your Monthly Production Capacity?
A: 5000 Pieces.
9)   Q: What is your Shipping Term?
A: By Sea/Air


IV.Contact Information: