Gantry Type Straight Seam Welding Machine

• Customization: Available
• Certification: CE
• Warranty: 3years
• Model NO.: EN-SWHN
• Material: Stainless Steel ; Gavalized Steel
• Net Weight: 4600kg
• Shear Length Range: Adjustable
• Tank Diameter: 310—600mm
• Tank Length: 1000-3200mm
• Rated Power: 7.5kVA
• Rated Voltage: 380VAC 50Hz
• Compressed Air Pressure: 0.45MPa
• Production Line: Non Pressure Water Tank &Pressure Water Tank
• Barrel Diameter: 310-800mm
• Type: Electrostatic Spraying Equipment
• Application: Hardware Spraying Equipment
• Method Type: Automatic
• Condition: New
• After-sales Service: 3years
• Transport Package: Container
• Trademark: Ensource
• Origin: China, Zhejiang
• HS Code: 84623920
• Production Capacity: 100-1000 Sets/Day

Product Description

        Gantry Type Straight Seam Welding Machine

I. Brief Introduction

The machine is used for bending the two sides hole of solar water heater vacuum tube to make dabber respctively, and keep the vacuum tube in a plane, make the vacuum tube hole 2-3 points increased strength, in the operation not make the pipe hole deformation. It is a part of essential equipments in solar water heater manufacturing industry.



II. Technical Data
i.working condition
 

Material	pearl plate,aluminizing zinc,stainless steel,Fluorine titanium plate etc
Barrel diameter	310-600mm
Maximum working length	L=3000mm
.Working thickness	≤2.5mm

ii.technical parameters,requirement
1.Rated voltage:380VAC 50HZ
2.Rated power:1.5KVA
3.Height/width:according to customer requirements, if no special requirements, according to conventional production requirements.
4.Compressed air pressure:0.45mMpa
5. Electric part warranty period one year.
6. Pneumatic element: pneumatic element made by AIRTAC
The device use for solar water heater tank tube hole to make dabber on the two sides, Will the solar e water heater inside bucket of vacuum tubes hole in a plane, make the vacuum tube hole 2-3 points increased strength, in the operation not make the pipe hole deformation, reduce scrap, sheet bending place does not produce indentation, need not special mold, use cost is low, installation and operation are convenient, has the very high plane degrees.

 

III.FAQ

1)  Q: What is your Delivery Time?
A: LCL order/Sample order:10 days
Full container order:15 days
2)    Q: What is your Warranty Time?
A: 3 years.
3)    Q: Can you accept OEM?
A: Of course!
4)    Q: What is your Payment Term?
A: We accept T/T or L/C at sight,Western Union,MoneyGram,Paypal.
5)    Q: What is your MOQ?
A: 1 sets.
6)    Q: What is your Packing?
A: Carton container.
7)    Q: What is your FOB Port?
A: We accept FOB SHANGHAI etc
8)    Q: What is your Monthly Production Capacity?
A: 5000 Pieces.
9)   Q: What is your Shipping Term?
A: By Sea/Air

IV.Contact Information: