Circular Seam Weding Equipment with Liquid Oxygen (LOX) Tank

• Customization: Available
• Transmission Type: Flexible
• Rhythm: Flow Production Line
• Model NO.: EN source
• Automatic Production Line: Assembly
• Production Scope: Product Line
• Flexible Production: Intelligent Manufacturing
• Certification: LR, ISO, CE, ABS
• Condition: New
• Automation: Automatic
• After-sales Service: Overseas Third-Party Support Available
• Transport Package: Wooden Box Packing
• Trademark: ENsource
• Origin: China
• Production Capacity: 99999

Product Description

Solar Water Heater Production Line Heat Pump Enamel Tank Production Line manufacturing process

Solar water heater production line is special equipment for making solar water heaters, electric water heaters, air source, water barrels, etc. Solar water heater machine line includes pressurized and non-pressurized solar water heater production lines for different solar water heater customers. Solar water heater machines main producing process: inner tank solar water heater machinery line, outer tank solar water heater machinery line, dish cover making machine, polyurethane foaming machine, automatic packing and cleaning line, electrostatic spraying machine, etc.Equipment is made of steel plate, special steel and other materials after heat treatment and machining process, etc.

Specification

The dedicated burner controller supports full-process automatic control, including flame detection and flameout alarm functions, and allows seamless switching between manual and automatic operation modes.
 
Each burner assembly consists of a gas burner, pulse controller, gas solenoid valve, air regulating valve, ignition transformer, ignition controller, gas stabilizing valve, combustion-supporting fan and connecting pipelines. The system receives 4-20mA signals from thermocouples and transmits them to the pulse controller, which regulates the timing and combustion intensity of each burner to achieve precise and stable temperature control.
 
 
 
 
 

2.Air pressure automatic Inner tank strength machine

The temperature control system adopts PID intelligent temperature 
controller for automatic temperature control. The temperature 
controller can set the temperature for automatic temperature control. In 
addition, it can centrally control the start-up of the combustion

supporting fan, the fast switching valve of the gas main, and the fault 
alarm of each zone of the burner. 

The on-site ignition control system and automatic temperature 
control system are combined to achieve ignition, flame detection, 
flameout protection and alarm, precise air-fuel ratio, and continuous 
automatic temperature control. To achieve safety and reliability, 
environmental protection and energy saving, high-precision temperature 
control, the system can ensure that the burner operates at its optimal 
state for different process curves and loading capacities, and make the 
actual temperature curve and theoretical process curve consistent.

3.Automatic Outer Tank Cover Edge Cutting and Flanging Machine for Solar Powered Water Heater

 The combustion self-control system is equipped with reliable safety 
protection devices. Equipped with multiple layers of protection 
measures such as automatic shutdown for overpressure and 
undervoltage, automatic detection and alarm for flameout, and air 
circulation interlock.

The whole machine is centrally controlled by Siemens PLC, with a 15 
inch MCGSTPC series human-machine interface. The speed and 
temperature adjustment of the suspension chain can be displayed and 
operated. 

The entire control system consists of two non-standard thermal 
control cabinets. The thermal control cabinet is located near the firing room, and it is recommended to place the control system in the 
air-conditioned room.

solar water heater machinery line

Welding travel carriage parts: use 110V DC 24W permanent magnet servo motor as the tool of driven. By the two stage turbine vortex rod can reduce speed to obtain a smooth and continuously adjustable speed. The drive with arbitrarily adjustment of the welding torch can uniform arc movement. Before the formal welding, the welding torch is over welding seam 0.8-1.0mm, consistent with the level (can adjustable "adjusting bolt", carefully corrected, and tighten the lower mold).

Technical Specifications

Design of burner, radiation tube, and smoke tube 
The radiation tube is made of stainless steel 310S (2520) by centrifugal casting, with an outer diameter of 200mm and a thickness of 7mm. It is tightly welded with a casting elbow of the same material to form a P-shaped radiation tube. Eight sets in total are arranged on both sides of the firing chamber wall. The burner is equipped with eight Ebofire 3M10N590 P-type radiant tube heating systems, with a maximum power of 120kw per unit.

Low noise blowers and induced draft fans supply air to the radiation tube, while exhaust gas is discharged outdoors through side wall pipelines via induced draft fans.
 
This burner features complete combustion, high efficiency and energy saving performance. The high airflow velocity at the outlet after combustion helps reduce the temperature difference at both ends of the radiation tube, improving temperature uniformity inside the furnace and shortening the heating period.
 
It is equipped with high-voltage electronic direct ignition, and the ignition electrode can be easily disassembled and installed independently for maintenance and replacement. Flame detection relies on ion rod ionization technology, ensuring stable and reliable flame monitoring. The burner operates on the jet mixing principle, keeping air and gas separate before injection, enabling thorough mixing and rapid combustion to effectively prevent flame backfire.

Drawings & Dimensions

Detailed CAD drawings and dimensional diagrams are available for download here or upon inquiry. Our engineering team can provide tailored designs to meet specific project requirements.

After Sales Service

Standard Warranty: 12 months or 2,000 operating hours (whichever comes first).
Extended Warranty: Optional coverage up to 36 months.
Global Support: 24/7 technical assistance and spare parts supply.
Training: On-site or remote operation/maintenance training.

Company Profile

HANGZHOU LINAN XINRAN SOLAR EQUIPMENT  CO.,LTD.

We are suppliers of production lines and non-standard equipment, and we can adapt our equipments to the specific needs of our customers.We are the Manufacturer of fire extinguisher cylinder Production Line, own independent factory. We have been engaged in this business since 2004. Also, We have been export for India, Vietnam, Russia and finished more than 60 factories for different customers with abundant experience in this area. We work with India customer like TATA, V-guard group, honeywell etc. Besides, our engineers have rich experience in debugging machines abroad.

Why Choose Us?

Other Products

OEM/ODM capabilities
Competitive pricing & bulk discounts
Fast shipping & customs clearance support
Turnkey project solutions

Wheel Loaders
Bulldozers
Motor Graders
Road Rollers
Forklifts

FAQ

Q: What is your Delivery Time?
A: LCL order/Sample order:10 days Full container order:15 days
 
Q: What is your Warranty Time?
A: 3 years.
 
Q: Can you accept OEM?
A: Of course!
 
Q: What is your Payment Term?
A: We accept T/T or L/C at sight,Western Union,MoneyGram,Paypal.
 
Q: What is your MOQ?
A: 1 sets.
 
Q: What is your Packing?
A: Carton container.
 
Q: What is your FOB Port?
A: We accept FOB SHANGHAI etc.
 
Q: What is your Monthly Production Capacity?
A: 5000 Pieces.
 
Q: What is your Shipping Term?
A: By Sea/Air
 
Q: I don't know how to use after i receive or i have problem during use, how to do?
A: We can provide team viewer/Whatsapp/Email/Phone/Skype with cam till all of your problems finished.We can also provide door service if you need.