Flatting machine production machinery for Solar Water Heater
Product Introduction:
The device use for solar water heater tank tube hole to make dabber on the two sides, Will the solar water heater inside bucket of vacuum tubes hole in a plane, make the vacuum tube hole 2-3 points increased strength, in the operation not make the pipe hole deformation. It is a part of essential equipments in solar water heater manufacturing industry.
Product Features:
This equipment is made by welding steel plate and other steel.
The device adopts compressed air through the cylinder up and down as pressure power.
The equipment adopts simple lock device through the cylinder up and down. Cylinder is tightly fasten to work position during working, and to loosen locking device of end work. After finishing those things, it can draw out workpiece.
The front of cylinder puts into device and moves to the localization slot during working, then you can press the top and bottom key of cylinder to pressuring cylinder and the muscle guide tightly. Then, starting motor power moves pressure roll to achieve the purpose of molding.
Working Condition:
Barrel diameter: 310-600mm
Working thickness: ≤2.5mm
Maximum working length: L=3000mm
Material: pearl plate,aluminizing zinc,stainless steel,Fluorine titanium plate etc
Technical Parameters:
| Model specification |
L1500/L2000/L2500/L3000/L3200mm |
| Rated voltage |
380VAC 50HZ |
| Rated power |
1.5KVA |
Height/width |
according to customer requirements, if no special requirements, according to conventional production requirements. |
| Compressed air pressure |
0.45mMpa |
| Electric part warranty |
one year |
| Pneumatic element |
pneumatic element made by AIRTAC |
The device use for solar water heater tank tube hole to make dabber on the two sides, Will the solar e water heater inside bucket of vacuum tubes hole in a plane, make the vacuum tube hole 2-3 points increased strength, in the operation not make the pipe hole deformation, reduce scrap, sheet bending place does not produce indentation, need not special mold, use cost is low, installation and operation are convenient, has the very high plane degrees.
Sample display
Packaging & shipment
Company profile
We are suppliers of production lines and non-standard equipment, and we can adapt our equipments to the specific needs of our customers.We are the Manufacturer of fire extinguisher cylinder Production Line, own independent factory. We have been engaged in this business since 2004. Also, We have been export for India, Vietnam, Russia and finished more than 60 factories for different customers with abundant experience in this area. We work with India customer like TATA, V-guard group, honeywell etc. Besides, our engineers have rich experience in debugging machines abroad.
CLICK TO ENTER OUR HOMEPAGE
FAQ
1) Q: What is your Delivery Time?
A: LCL order/Sample order:10 days
Full container order:15 days
2) Q: What is your Warranty Time?
A: 3 years.
3) Q: Can you accept OEM?
A: Of course!
4) Q: What is your Payment Term?
A: We accept T/T or L/C at sight,Western Union,MoneyGram,Paypal.
5) Q: What is your MOQ?
A: 1 sets.
6) Q: What is your Packing?
A: Carton container.
7) Q: What is your FOB Port?
A: We accept FOB SHANGHAI etc.
8) Q: What is your Monthly Production Capacity?
A: 5000 Pieces.
9) Q: What is your Shipping Term?
A: By Sea/Air
Audited Supplier 
Product Introduction:
){kind=link}