I. Introduce The working speed of this machine is 40 times/minute and it needs 4 processes to complete each barrel. People has to Load and unload materials, but its working efficiency is high, outward appearance is attractive and performance is stable. So this machine is an ideal folding and pressing equipment for different kinds of thin barrel--shaped containers.
2. Working Conditions 1.Cylinder diameter : diameter 310-600mm
2.Working piece thickness : 03-0.6mm
3.Maximum tank length: L=3000mm
4.Material : color steel plate, galvanized ,stainless steel etc
3. Technical specifications 1.The rated voltage : 380VAC 50HZ
2.Rated power :0.5KVA
3.Bending and pressure , the height and width: It can customization as for customer requirepment. 4.Compressed air pressure: 0.25mMpa ~ 0.6mMpa
5.The Pneumatic components :cylinder, solenoid valve ,is from AIRTAC
It is applicable for the tenon-mounted water barrel to be solid-pressed and get a nonrecurring forming,water tanks for solar water heater vacuum tube in two holes fold one side of the ribs, the solar water heater vacuum tube inside the barrel hole placed on a flat surface, so that vacuum holes 2-3 point increase instrength, in the operation does not cause pore deformation, reducing scrap, sheetbend does not produce pressure marks, no special mode With, the use of low-cost, easy installation and operation are with high flatness.
Audited Supplier 
){kind=link}